Tune Devices
0-10V Fixture Characterization
Overview Only follow this process if you experience issues with dimming after Lighting Sensor Configuration. Use the instructions below to create a custom 0-10V fixture characterization profile to use in place of the Default profile that's usually ...
Lighting Sensor Configuration & Troubleshooting
Overview Since it's possible to connect multiple light fixtures to a single SCN or DLA sensor, Commissioner needs to understand what type of device(s) is (are) being controlled and metered. This step in commissioning is broadly referred to as ...
Commissioning Digital Lumens Fixtures Using a USB Cable
Overview Commissioning via a USB cable requires physically connecting to each fixture. This method of commissioning is most suitable for users who infrequently use Commissioner and would like to program small numbers of fixtures. The most common ...
Commission a Keypad
Before a keypad will work with SiteWorx, it must be added to a Mapfile and commissioned to a gateway. This process is completed by installers or a commissioning agent using the Commissioner software program in combination with a USB wireless adapter. ...
Commission a Lighting Device: Wireless Discovery
Please review the Methods of Commissioning Lighting Devices before proceeding with the steps below. The guide below details how to add fixtures using the import CSV data method. This method is recommended for additions of 10 or less lighting devices, ...
Commission a Lighting Device: Serial Number Entry
Please review the Methods of Commissioning Lighting Devices before proceeding with the steps below. The guide below details how to add fixtures using the serial number entry method. This method is recommended for installations under 50 lighting ...
Commission a Lighting Device: Import CSV Data
Please review the Methods of Commissioning Lighting Devices before proceeding with the steps below. The guide below details how to add fixtures using the import CSV data method. This method is recommended for all new installations larger than 50 ...
Methods of Commissioning Lighting Devices
Before new lighting devices will work with SiteWorx, they must be added to a Mapfile and commissioned to a gateway. This process is completed by installers or a commissioning agent using the Commissioner software program in combination with a USB ...