Build a Map
Create Initial Groups
Overview Only follow this article during initial commissioning. If the site has already been deployed to SiteWorx, follow these instructions to modify groups in the SiteWorx WebApp. SiteWorx users configure lighting settings and control strategies ...
Sync the Map
Overview A "sync" action must be performed any time you change the map file by adding fixtures, zones, or networks. Otherwise, the map file will be up-to-date, but the settings in use by the fixtures in the facility will still reflect old settings. ...
Create, Modify, and Delete Zones
Zones are used in Commissioner to apply lighting settings to lighting sensors and fixtures, and to associate wireless devices with gateways. Zones do not appear in SiteWorx. When creating a new Zone, you must specify a wireless network on which that ...
Mapfile Background Image
This article explains how to add and manage the background image in a mapfile. The background image is a 2D layout depicting a facility floor plan. Add a New Background Image Prepare the background image Make sure to use a high quality layout that ...
Create a New Map
Follow these steps to start a new map: Open Commissioner Navigate to File > New Navigate to File > Save We recommend using the following filename structure: YYYYMMDD HHMM OrgName - AreaName - [summary of changes].map
Mapfile Checklist
Use this checklist to aid in commissioning a new SiteWorx facility. If you're unfamiliar with Commissioner and Mapfiles, we suggest reviewing this Overview article first. Want to expedite commissioning? Contact sales@siteworx.io about purchasing ...
Clip Path Points
Adding Path Points to a mapfile will create a tight Heat Map in SiteWorx that matches the background image boundaries. Only Certified Resellers can add Path Points. You must create a valid trapezoid Open Commissioner and target mapfile Move Fixture ...