Change Device Network or Zone

Lighting Devices

1. Double-click on the device under the Fixtures tab
   
2. Select a new Zone from the dropdown
   
3. Click OK
   
4. Sync the Map
   

To move multiple lighting devices to another Zone or Network, click and drag across multiple devices on the map, then right click on a highlighted fixture.

Non-Lighting Device

1. Double-click on the device
   
2. Select a new Zone from the dropdown
   
3. Click OK
   
4. Ensure the DLUSB is connected to your computer, then sync the device
   

To change the network of an SWN-RCP-ST, contact support@siteworx.io.

• Related Articles

• Reset Device

  Use this tool to reset a specific data field collected by a device, or to completely reset a device back to factory settings. The following data types can be reset: Clear event log Clear usage data Reset real-time clock (match the fixture's internal ...

• Remove a Device

  In Commissioner, right-click the target device Click Delete Fixture Click OK to confirm the change To remove a fixture that's already uploaded to SiteWorx, contact support@siteworx.io.

• How to find the network of a non-communicating light

  Overview When you sync a light, Commissioner will only attempt to communicate with the light on the network listed in the Fixture Network column. If you suspect the light may be on a different network than listed in the map, you can use the "Find on ...

• Download Device Log

  Use this tool to download technical data about a particular device, most often used for troubleshooting purposes and frequently requested by Support. The log file will download to your device in CSV format and can be emailed as needed. It includes ...

• Commission a Lighting Device: Wireless Discovery

  Please review the Methods of Commissioning Lighting Devices before proceeding with the steps below. The guide below details how to add fixtures using the import CSV data method. This method is recommended for additions of 10 or less lighting devices, ...