Fixture Target

The yellow target in the grid positions fixtures on the map grid. When you click and drag the target, and then add a fixture, that fixture lands in the target location. Also, you can right-click on the map and select Move Target Here to specify the target location.

Note that the target is aimable. When you right-click on the target, you can select among four directions: up, down, right, left. Then, as you add fixtures the target moves in the aimed direction.

• Related Articles

• Mapfile Devices

  Icons on the map represent different device types and states. Use the legend on this page to identify. Device Icons Fixtures appear on the map grid as square icons. Gateways appear on the map grid as wedge icons. Optional keypads appear as boxed ...

• Map Legend

  The map legend is available at the top right of the Commissioner application. For quick reference, click the map legend icon to display the fixture legend, which displays the following information:

• Toolbar

  The Toolbar runs along the top of the Commissioner application. Open Map — Open and edit an existing map file. Commissioner map files use the .MAP file extension Save Map — Manually save your work Add Zone — Add one or more zones to the map file. A ...

• 0-10V Fixture Characterization

  Overview 0-10V Fixture Characterization is applicable to all 0-10V fixtures connected to any SiteWorx lighting sensor. A Characterization Profile is generated by Commissioner and describes how a sensor interfaces with a particular fixture to dim it. ...

• Summary Bar

  The summary bar can be found at the bottom of the commissioner application. The summary bar displays the following information: Total lighting sensor/fixture quantity Lighting sensors/fixtures currently selected quantity Total programmed lighting ...