What is Daylight Harvesting?

What is Daylight Harvesting?

Daylight Harvesting enables intelligent lighting sensors, like the SCN and DLA products, to automatically detect ambient sunlight shining through skylights and dim their light output accordingly. The dimming target is equal to the light levels in the facility when it's dark outside, and is established using a one-time Daylight Harvesting Calibration procedure.

Daylight Harvesting is an advanced feature of the SiteWorx Tune lighting control application. It allows facilities to save up to an additional 30% of lighting energy normally consumed by LED lighting luminaires during daylight operating hours.
    • Related Articles

    • Daylight Harvesting Calibration

      Overview Daylight Harvesting must undergo a one-time calibration procedure to establish a target light level for each fixture in the facility. The procedure establishes a dimming curve for each fixture which is automatically adjusted based on the ...
    • Enabling / Disabling Daylight Harvesting

      Before Daylight Harvesting can be enabled, a one-time Calibration procedure must be performed remotely by SiteWorx. Enabling Daylight Harvesting for a Fixture Open the Administration Console, and click on the DH icon Click the target grey shaded ...
    • Troubleshooting Daylight Harvesting

      Overview In SiteWorx, daylight harvesting (DH) is calibrated remotely. Moreover, the DH targets are automatically adjusted as the active and inactive levels are changed in Tune. As such, Commissioner should NOT be used to troubleshoot DH at SiteWorx ...
    • Getting Started - Admin Console

      Only users with Admin permissions can access the Administration Console. Contact your Admin if you require access. After setting up SiteWorx Analyze, get familiar with SiteWorx Admin Console. The Administration Console contains configuration and ...
    • Priority of Lighting Control Features

      When multiple lighting control features are active at the same time, fixtures follow a set priority to determine which setting takes effect. The order of priority from highest to lowest is: Override - This setting has the highest priority, and when ...