Status Indicator Behavior of DLA-V Lighting Controls Sensors

Status Indicator Behavior of DLA-V Lighting Controls Sensors

Overview

DLA-V lighting control sensors display status flash patterns every two seconds. The LED indicators are visible from the floor through the fixture's motion sensor.

Red Indicator Patterns

  1. Single Blink: Operating normally; not connected to a network.
  2. Double Blink: Operating normally; connected to a network.
  3. Triple Blink: Sensor has been reset, is operating normally, and has not yet communicated with SiteWorx
  4. Rapid Blink: Wireless communication in progress.

Blue Indicator Patterns

  1. Slow Single Blink (Every 2s): Motion sensor active.
  2. Rapid Single Blink: Over-temperature limit exceeded; fixture shutting down.

Both LEDs (Combined & Alternating)

  1. Slow Alternating Blinks: Device identifying for configuration.
  2. Rapid Alternating Blinks: Wireless reset in progress.
  3. Standard Operational State: Red LED displays a double blink while the Blue LED displays a slow single blink.

Troubleshooting: No LED Activity

If neither LED indicator is flashing, refer to the Troubleshooting DLA-V Lighting Control Sensors guide.